The Best Gear Reverse Engineering Solution

No matter in any industrial industry, there is always a problem. The imported equipment gear is damaged, but the original products are expensive and the delivery time is long, or the original suppliers cannot be found.
Shiuh Cheng localized reverse engineering service is the best solution to this problem.

Shiuh Cheng provides a case study for reference. A well-known petrochemical company in Taiwan, the used air compressor gears were worn and broken. They bought gears from Siemens, the original equipment manufacturer. But the price was unbearable. Later, through the customer introduction they found Shiuh Cheng Gear and intend to localize it.

And this is an important production equipment for the customers, so it is very cautious about localization.
Because it was the first time to cooperate, the customer did not rush to place an order, so they sent the damaged gear to Shiuh Cheng, and asked to reverse engineering and rework the gear.

The key factor here is that if the reverse parameters of the gear are not correct, then it will cause abnormal noise and vibration. After the replacement, the operation is smooth, so the customer can safely transfer the order that was originally going to be cut from Siemens to Shiuh Cheng for localized production.

The customer mentioned that after Shiuh Cheng repaired the gear. A retired technician consultant from Siemens was also entrusted to check the tooth contact and operation test.
The consultant was very satisfied with the results and praised Taiwan's ability to produce such high-precision gear.
Over the years, Shiuh Cheng has helped many customers to successfully complete localization development.
Shiuh Cheng gear is your best reverse engineering solution!